Model SFP Optical Transceiver » Media Converter SFP » Media Converter SFP Gigabit

  • Media Converter SFP Gigabit

  • MODEL:G-UMC-1GX1GT-SFP
  • G-NET G-UMC-1GX1GT-SFP 10/100/1000Mbps self adaptive Gigabit SFP Media Converter uses the switching technology to conduct media conversion,which meets the standards of IEEE802.3, IEEE802.3u,IEEE802.3z and IEEE802.3ab,IEEE 802.3x. G-UMC-1GX1GT-SFP supports two types of media network connections:10Base-T/100Base-TX/1000Base-T and 1000Base-SX/LX.G-UMC-1GX1GT-SFP can conduct mutual conversion between 10Base-T/100Base-TX/1000Base-T twisted pair electrical signal and 1000Base-SX/LXoptical signals.It extends the transmission distance of a network from 100m over copper wires to 120Km. This fiber converter supports transmission in dual fibermulti-mode,dual-fiber single-mode and single-fiber single-mode fibers.

Features
▪Support 1X1000Base-FX SFP Slot and 1x10/100/1000Base-TX Auto-Negotiation RJ45 port 
▪Compliant with IEEE802.3,IEEE 802.3ab,IEEE 802.3z,IEEE802.3u,IEEE802.3x standard
▪Support store-and-forward forwading mode
▪Flow Control Type: Full duplex adopts IEEE 802.3x standard, half duplex adopts back pressure standard
▪Supports10/100/1000M full duplex and half duplex
▪Supports auto MDI / MDI-X,obtains the fastest possible connection
▪Supports MAC address auto learning and auto aging
▪LED indicators display the working status,supporting simple trouble shooting
▪All ports support non-blocking full wire-speed forwarding rate
▪Plug and play, no configuration required
▪Desktop or Wall Mounted or Card -type,easy to install and use
▪Fanless design,natural cooling
▪External Power Supply

Specification

Standard IEEE802.3 10Base-T
IEEE802.3ab 1000Base-T
IEEE802.3z 1000Base-SX/LX
IEEE802.3u 100Base-TX/FX
IEEE802.3x flow control
Switch Properties MAC Address Table: 4K
Packet Buffer Size: 256K
Switching mode: Store and Forward
Conversion mode: Medium conversion
Delay time: <10
μ s
Bit error rate: <1/1000000000
Network Medium 10BASE-T: Cat3,4,5 UTP(≤100 meters)
100BASE-TX: Cat5 UTP or better(≤100 meters)
1000BASE-TX: Cat5 UTP or better(≤100 meters)
Flow Control Full duplex adopts IEEE 802.3x standard, half duplex adopts back
pressure standard
Fiber Port 1X1000Base-FX SFP slot
Ethernet Port 1x10/100/1000Base-TX RJ45 Port
Supports 10/100/1000Base-T auto negotiation and auto-MDI/MDI-X
Support 10/100/1000M full/half duplex mode
Transmission
Distance
Twisted pair: CAT5e/CAT6(the max distance up to 100m)
Fiber cable:depends on the SFP modules used
LED Indicator PWR (power)
FDX(Ethernet port data transmission mode indicator ON:Full
duplex/OFF:Half duplex)
FX LINK/ACT (fiber link action)
TX LINK/ACT (twisted pair packet forwarding action)
FX 100 (optical fiber transmission rate 100M)
TX 100 (twisted pair transmission rate 100M)
Power External Power Adapter
Input Voltage:AC 100-240V
Output Voltage:DC 5V 2A
Max Power consumption: 5W

 

Mechanical Case: Metal
Cooling way: Natural cooling,fanless design
Installation:Desktop
Dimension: 93X70X25mm(LxWxH)(External power supply)
Environmental Working Temperature: 0°C to 50°C
Storage Temperature:-20°C to 70°C
Working Humidity: 10%
90% (non-condensing)
Storage Humidity: 5% ~ 90%(non-condensing)
MTBF 100,000 hours