HHD-210G-20A/B

  • HHD-210G-20A/B

  • MODEL:

  • Gigabit Ethernet 10/100/1000Mbps WDM Media Converter 20km SC (Tx = 1310nm)

Detail Specifications Other
G-NET HHD-210G-20A/B Gigabit Ethernet Fiber Media Converter uses the switching technology to conduct media conversion,which meets the standards of IEEE802.3, IEEE802.3u,IEEE802.3z and IEEE802.3ab,IEEE 802.3x.It supports two types of media network connections:10Base-T/100Base-TX/1000Base-T and 1000Base-SX/LX.It can conduct mutual conversion between 10Base-T/100Base-TX/1000Base-T twisted pair electrical signal and 1000Base-SX/LX optical signals.It extends the transmission distance of a network from 100m over copper wires to 20Km by single mode single core fiber.
 
 
Features
▪Support 1X1000Base-FX Fiber Port and 1x10/100/1000Base-TX Auto-Negotiation RJ45 port
▪Compliant with IEEE802.3,IEEE 802.3ab,IEEE 802.3z,IEEE802.3u,IEEE802.3x standard
▪Support store-and-forward forwading mode
▪Flow Control Type: Full duplex adopts IEEE 802.3x standard, half duplex adopts back pressure standard
▪Supports10/100/1000M full duplex and half duplex
▪Supports auto MDI / MDI-X,obtains the fastest possible connection
▪Supports MAC address auto learning and auto aging
▪LED indicators display the working status,supporting simple trouble shooting
▪All ports support non-blocking full wire-speed forwarding rate
▪Plug and play, no configuration required
▪Desktop,easy to install and use
▪Fanless design,natural cooling
▪External Power Supply(Built-in power aslo avaliable)

Specification

Standard IEEE802.3 10Base-T
IEEE802.3ab 1000Base-T
IEEE802.3z 1000Base-SX/LX
IEEE802.3u 100Base-TX/FX
IEEE802.3x flow control
Switch Properties MAC Address Table: 4K
Packet Buffer Size: 256K
Switching mode: Store and Forward
Conversion mode: Medium conversion
Delay time: <10μs
Bit error rate: <1/1000000000
Network Medium 10BASE-T: Cat3,4,5 UTP(≤100 meters)
100BASE-TX: Cat5 UTP or better(≤100 meters)
1000BASE-TX: Cat5 UTP or better(≤100 meters)
Flow Control Full duplex adopts IEEE 802.3x standard, half duplex adopts back pressure standard
Fiber Port 1X1000Base-FX Fiber port
Wavelength: 1310nm/1550nm
Simplex SC/UPC connector
Ethernet Port 1x10/100/1000Base-TX RJ45 Port
Supports 10/100/1000Base-T auto negotiation and auto-MDI/MDI-X
Support 10/100/1000M full/half duplex mode
Transmission Distance Twisted pair: CAT5e/CAT6(the max distance up to 100m)
Fiber:0-20Km
LED Indicator POWER (power)
FX LINK (fiber link action),
TP LINK1000 (twisted pair connection 1000M)
TP LINK100 (twisted pair connection 100M),
TP ACT (twisted pair packet forwarding action)
FDX(Ethernet interface mode indicator ON:Full duplex/OFF:Half duplex)
Power External Power Adapter
Input Voltage:AC100-240V,50/60Hz
Output Voltage:DC 5V 2A
Max Power consumption: 5W
Mechanical Case: Metal
Cooling way: Natural cooling,fanless design
Installation:Desktop or Wall Mounted
Dimension: 93X70X26mm(LxWxH)
Environmental Working Temperature: 0°C to 50°C
Storage Temperature:-20°C to 70°C
Working Humidity: 10%～90%(non-condensing)
Storage Humidity: 5% ~ 90%(non-condensing)
MTBF 100,000 hours

G-NET OPTICAL TECHNOLOGY CO., LIMITED

Address: 17F-2, No. 97, Chongsin Road, Sec. 4,, Sanchong Dist.,, New Taipei, Taiwan.
Tel:  (886 2) 29739169       Fax:  (886 2) 29748190
Web Site: https://www.gnet.com.tw