• G-UES-4GXC24GT

  • MODEL:G-UES-4GXC24GT-SFP
  • 24x10/100/1000Base-TX+4x10/100/1000Base-TX/4x1000Base-FX SFP Combo,1U Rack

G-NET G-UES-4GXC24GT-SFP is a smart unmanaged Gigabit Ethernet Switch.It provides 24x10/100/1000Base-TX self adaptive RJ45 ports and 4x10/100/1000Base-TX RJ45 port/4X1000Base-FX SFP combo ports for uplink,which can implement mutual conversion between 10Base-T/100Base-TX/1000Base-TX twisted pair electrical signal and 1000Base-FX optical signal. G-UES-4GXC24GT-SFP can extend the transmission distance of a network from 100m over copper wires to 120Km.This type of fiber converter supports two different types of network connection media types: 10/100Base-TX and 1000Base-FX.It also supports IEEE 802.3,IEEE 802.3ab,IEEE 802.3z,IEEE 802.3u,IEEE 802.3x standard with 10/100/1000M,full/half-duplex, and MDI/MDI-X auto negotiation,All ports support wire speed switch, jumbo frame tr ansmission.It is a reliable and economic choice for your security system,electronic power system and traffic system.
 
 
Features
▪Support 24x10/100/1000Base-TX RJ45 ports with 4X10/100/1000Base-TX RJ45/4X1000Base-FX SFP Combo ports for uplink
▪Compliant with IEEE802.3,IEEE 802.3ab,IEEE 802.3z,IEEE802.3u,IEEE802.3x standard
▪Support store-and-forward forwading mode
▪Flow Control Type: Full duplex adopts IEEE 802.3x standard, half duplex adopts back pressure standard
▪Supports10/100/1000M full duplex and half duplex
▪Supports auto MDI / MDI-X,obtains the fastest possible connection
▪Supports MAC address auto learning and auto aging
▪Each RJ45 port uses anti-high voltage circuit, strengthen the lightning protection and anti-interference ability
▪LED indicators display the working status,supporting simple trouble shooting
▪All ports support wire speed switch, jumbo frame transmission
▪Plug and play, no configuration required
▪1U Rack Mounted or Desktop,easy to install and use
▪Fanless design,natural cooling
▪Built-in power supply
 

Specification

Standard IEEE802.3 10Base-T
IEEE802.3ab 1000Base-T
IEEE802.3z 1000Base-SX/LX
IEEE802.3u 100Base-TX/FX
IEEE802.3x flow control
Switch Properties
Switching Capacity: 56Gbps
MAC Address Table: 8K 
Packet Buffer Size: 4.1M
Packet Forwarding Rate:40.32Mbps
CPU:500Mhz
Switching mode: Store and Forward
Network Medium 10BASE-T: Cat3,4,5 UTP(≤100 meters)
100BASE-TX: Cat5 UTP or better(≤100 meters)
1000BASE-TX: Cat5 UTP or better(≤100 meters)
Flow Control Full duplex adopts IEEE 802.3x standard, half duplex adopts back pressure standard
Uplink Port
4X10/100/1000Base-TX RJ45/4X1000Base-FX SFP Combo ports
Ethernet Port 24x10/100/1000Mbps RJ45
Transmission Distance Twisted pair: 0-100m(CAT5e/CAT6)
SFP port: depend on the SFP module choose
Power Requirements Input Voltage:AC100-240V,50/60HZ
Indicator PWR,Link/Act
Mechanical Case: Metal
Cooling way: Fanless desgin,neutral colling
Dimension:440x209x45mm(LxWxH)
Weight:3Kg
Installation:1U Rack Mounted or Desktop
Environmental Working Temperature: 0°C to 50°C
Storage Temperature:-40°C to 70°C
Working Humidity: 10%~90% (non-condensing)
Storage Humidity: 5% ~ 90%(non-condensing)
MTBF 100,000 hours