Media-POE-SWITCH Converter » Ethernet Switch » G-MES-18GX6GC-4XG
G-MES-18GX6GC-4XG
- MODEL:
G-NET G-MES-18GX6GC-4XG is standard layer 2 non-blocking switch. Based on high-performance ASIC chip technology, the modular structure design, which have a capability of multilayer switching and wire-speed routing forwarding. Can be deployed in the metropolitan area network, and provides a few last 1 km technology to gather and core data exchange. At the same time, G-MES-18GX6GC-4XG provide a complete IPv4/IPv6 routing, including tunnel and IP multicast.The user can set all kinds of functions of switch through the Web, SNMP and so on. G-MES-18GX6GC-4XG support layer 2 VPN, DOS defense, static routing, RIP, OSPF, BGP, PIM-SM, PIM-DM, DVMRP, NAT, Qos, RSTP, MSTP, VLAN, Port Security, a storm suppression, ACL access control and other functions, which is very suitable for the aggregation application of large-scale network and the core application of medium and small-sized network.
Specification
Fixed port | 18x1.25G Ports+6xGigabit RJ45/1.25G SFP Combo Ports+4x10G SFP+ Ports+1xConsole | |
Backplane bandwidth | 128Gbps | |
Packet forwarding rate | 95.232Mpps | |
Processor | RISC 400MHz | |
Flash memory capacity | 8MB | |
The memory capacity | 128MB | |
Address table | 32K | |
Product characteristics | ||
Spanning tree |
Support STP, RSTP, MSTP
Support PVST/PVST+
|
|
VLAN |
Support port-based VLAN
Support MAC-based VLAN
Support 802.1Q labeled VLAN
Support for Super Vlan
Support for Private Vlan
Support for the GVRP dynamic VLAN configuration
Support QinQ and flexible QinQ
Support for Voice VLAN
|
|
Flow control |
Based on a standard IEEE 802.3x flow control
Using IEEE 802.1Qbb priority flow control
Support CAR function
|
|
Broadcast control | Restraining broadcast storm, stop sending so long as reaching a critical point | |
Multicast control | IGMP Snooping multicast message automatic monitoring | |
Multicast routing |
IGMP v1/v2/v3, MLDv2
PIM-SM, OLINK&PIM-DM
DVMRP (Distance Vector Multicast Routing Protocol)
GMRP (multicast dynamic registration protocol)
|
|
Port binding |
Each group of a maximum of 8, while support 128 group
LACP dynamic or static polymerization
|
|
Port mirroring | Support based on flow classification mirroring and port mirroring | |
Stacked |
Stacked 16 hard, soft stacking 32
Using clustering techniques, with a unified centralized management of IP address to do address resource saving
|
|
Routing management |
Static routing
RIP v1/v2, OSPFv2, BEIGRP (compatible with Cisco EIGRP), BGPv4, ISIS, BGP
Anti virus intelligent routing function
|
|
Strategy routing | Support based on IP strategy routing | |
The proxy function | Support Proxy ARP, DNS Proxy | |
Redundancy backup | Support for VRRP, HSRP Hot Standby Router Protocol | |
Characteristics of DHCP | DHCP Server, DHCP Client and support DHCP relay | |
Function of NAT | Support the static or dynamic NAT address translation function | |
Safety characteristics |
IEEE 802.1x port certification, PKI certification
Port Security (Port Security) function
Hardware support for IP ACL ACL ACL, MAC, Vlan
Hardware support for port based user IP+MAC+Vlan ID+ user account a variety of factors combined to bind
Support IP Source Guard
Support WEB interface user authentication
Remote RADIUS, TACACS+ certification
User classification management and password protection
Net shield technology
Safety control technology
Policy control list
|
|
Quality of service |
IEEE 802.1Qau congestion mechanism
Each port 8 send queue mapping 802.1p 8 priority
WRED, WFQ, SP and FIFO queue scheduling algorithm
Best-Effort Service
Differentiated Service
Strict Priority
Weighted Round Robin
First come first served
TOS to mark
RTS
|
|
Network management |
SNMP v1/v2/v3
RMON (1,2,3,9 group)
Telnet
WEB interface
Support for cluster management
Support SSH
Support for PDP (compatible with Cisco CDP.)
To support the fan, temperature, system log, hierarchical alarm
|
|
Physical characteristics | ||
Appearance size | 442mm × 285mm × 44mm | |
Power characteristic | AC 110-240V adaptive, 47-63Hz, 1A/230V, RPS power hot backup | |
Power | 80W | |
Indicator lamp | Power indicator, indication of system, connecting / transceiver instructions | |
Environment humidity/temperature | 0-50 ℃ operation,-40-70 ℃ preservation,0-90% no condensation |